| |
 |
 |
| Multi Port 3 Way - 4 Way |
| Lubricated Plug Valve |
| |
| Product Description |
| Valve Material
Selection Guide |
| Valve Lubricant
Selection Guide |
| Valve
Dimentional Drawings |
| |
| |
| PRODUCT DESCRIPTION
[ back to top ] |
| RASHTRIA Lubricated
Taper Plug Valve has been successfully used in variety of services
because of its unique in line maintaince capability.The Plug & Body
seating surfaces,which are grinded and matched ,are not exposed
to the line fluid.Valves are impreganated with P.T.F.E. which provides
greater wear resistance and ensures low consistant operating torque
and at the same time reducing the need of lubrication.P.T.F.E. also
enhancs resistance to seizure. |
| Multiport Lubricated Taper Plug
Valves Provide |
| i.Reduction in number
of valves & fittings which results in simplified pipe layout
|
| ii.Quik and easier operation with
increased safety and reliability. |
| iii.Reduction in overall cost of
installation & operation |
| Multiport Plug Valves of 3 way
and 4 way are ideally suited for flow diverstion and tight shut-off
against full rated pressure in the positive direction i.e.the line
pressure holds the plug against the body port which is to be shut
off from higher pressure. |
| Multiport Plug Valves are supplied
with square stems suitable for wrench operation.Whrenches , as required
, should however be ordered seprately |
| As a standard , Multiport Plug
valves supplied with RASHTRIA-300 sealent which is Suitable for
most services other than acid solutions and petroleum products.On
request Plug sealent from a wide range offered, can be supplied
to suit the nature of services.It is recomended that you consult
us before selecting the plug sealent for a new service. |
| Major
Market : Chemical , Petrochemical
,Petroleum , Power , Steel , Paper , Mining. |
| Size Range
: 25mm to 50mm Secrewed Ends BS
21 (parallel or taper) / To match flanges drilled to BS 10 Table
D,F and ANSI/ASME B 16.1 Class 125. Valves can also be offered with
undrilled flanges. |
| Temprature
Range : - 15 Deg.C to 325 Deg. C
|
| Pressure Range
: 125 psi - 200 psi |
| Body
Material : Cast Iron, Carbon Steel
|
| VALVE
MATERIAL SELECTION GUIDE [ back
to top ] |
| Multi
Port 3 Way - 4 Way
Lubricated Plug Valve
|
| VALVE
DIMENTIONAL DRAWINGS [ back
to top ]
|
| Cast
Iron Lubriacted Plug Valve-3 way & 4 way Way-Regulart Pattern
- Standard Type
|
|
|
|
|
