| |
|
 |
| C.S. Horizontal Lift Check
Valve |
| |
| |
| Design Features
|
| Salient Features
|
| Valve Dimentional
Drawings |
| |
| DESIGN FEATURES [
back to top ]
|
| RAHTRIA Cast Steel
Horizontal Lift Check Valve is designed to work under varied conditions.
RASHTRIA Cast Steel Horizontal Lift Check Valve to BS-5160/DIN
2401. PN-40 13% Cr. S.S. (AISI-410) trim. Bolted Bonnet Integral
flanges as per BS-4504,PArt 1 Table 40/1/DIN 2545,PN 40 raised
face , drilled Body tested to 60 bar and seat tested to 40 bar
hydraulic pressure. |
| SALIENT FEATURES
[ back to top ] |
| i. Stream lined full
flow area is provided to minimise pressure drop in the body. |
| ii. Renewable S.S.
13% S.S. (AISI-410) body seat ring and disc facing ring have at
least 50 HB difference in Hardness. |
| iii. Bolted body
cover joint. |
| iv. Self aligning
fully guided disc ensures proper seating of valve disc on body
seat ring. |
| Size Range : 15mm
to 200mm Flanged Ends . |
| Temprature Range :
upto 425 Deg. C |
| Body Material
: Carbon Steel |
| VALVE DIMENTIONAL DRAWINGS
[ back to top ] |
| Cast
Steel Horizontal Lift Check Valves conforming to BS:5160/DIN 2401
PN-40 |
| |
|
|
